Opel Vectra B

since 1995 of release

Repair and car operation



Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
- 9. Running gear
   9.1. Introduction
   9.2. Technical characteristics
   9.3. Rotary fists
   9.4. Replacement of forward bearings of a nave
   9.5. Forward bottom frame
   9.6. The lobby is resistant
   9.7. Stabilizer of cross-section stability of a forward suspension bracket
   9.8. Bottom lever of a forward suspension bracket
   9.9. Replacement of the bottom hinge of a forward suspension bracket
   9.10. Back nave
   9.11. Back rack
   9.12. Stabilizer of cross-section stability of a back suspension bracket
   9.13. Top lever of a back suspension bracket
   9.14. Bottom lever of a back suspension bracket
   9.15. Steering wheel
   9.16. Steering column
   9.17. Intermediate shaft of a steering column
   9.18. Replacement of protective covers of steering transfer
   9.19. Steering transfer
   - 9.20. Pump of the amplifier of a steering
      9.20.1. Petrol engines
      9.20.2. Diesel engine of 1,7 l
      9.20.3. Diesel engine of 2,0 l
   9.21. Air removal from steering system with the amplifier
   9.22. Tip of steering draft
   9.23. Steering draft
   9.24. Corners of installation of wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions





9.20.3. Diesel engine of 2,0 l

Removal
Prevention

Do not separate the pump of the amplifier of a steering from an arm. New pumps are delivered together with arms.


PERFORMANCE ORDER
1. Using clips, press submitting and returnable hoses about a tank.
2. Remove an auxiliary driving belt.
3. Remove the air conditioning compressor.
4. Establish the container under the pump of the amplifier of a steering and disconnect the delivery pipeline from the pump.
5. Weaken a collar and disconnect a returnable tube from the pump.
6. Unscrew a bolt, fixing a pipe for щупа for measurement of level of engine oil to the pump and move a pipe aside.
7. Unscrew bolts of fastening of an arm of the pump to the engine and take the pump from under the engine.

Installation

PERFORMANCE ORDER
Installation is made in sequence, return to removal. Fill in fresh liquid in hydraulic system of the amplifier of a steering and remove air.