Opel Vectra B

since 1995 of release

Repair and car operation

Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
- 9. Running gear
   9.1. Introduction
   9.2. Technical characteristics
   9.3. Rotary fists
   9.4. Replacement of forward bearings of a nave
   9.5. Forward bottom frame
   9.6. The lobby is resistant
   9.7. Stabilizer of cross-section stability of a forward suspension bracket
   9.8. Bottom lever of a forward suspension bracket
   9.9. Replacement of the bottom hinge of a forward suspension bracket
   9.10. Back nave
   9.11. Back rack
   9.12. Stabilizer of cross-section stability of a back suspension bracket
   9.13. Top lever of a back suspension bracket
   9.14. Bottom lever of a back suspension bracket
   9.15. Steering wheel
   9.16. Steering column
   9.17. Intermediate shaft of a steering column
   9.18. Replacement of protective covers of steering transfer
   9.19. Steering transfer
   + 9.20. Pump of the amplifier of a steering
   9.21. Air removal from steering system with the amplifier
   9.22. Tip of steering draft
   9.23. Steering draft
   9.24. Corners of installation of wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions

9.23. Steering draft

Removal

PERFORMANCE ORDER

1. Remove steering transfer.

2. Remove the corresponding tip of steering draft.

3. Measure distance from a lock-nut of a tip of steering draft till the end of steering draft, then unscrew a lock-nut.

4. Weaken collars and remove a protective cover of steering transfer.

5. Unscrew the internal spherical hinge of steering draft from a gear lath and remove steering draft.

Installation

PERFORMANCE ORDER

1. Screw up the spherical hinge in a gear lath the demanded moment.

2. Establish a protective cover of the steering mechanism on its case and steering draft and fix it collars.

3. Screw a lock-nut in situation in which it was before removal.

4. Establish a tip of steering draft.

5. Establish steering transfer.

6. Check and, if necessary, adjust corners of installation of forward wheels.