Opel Vectra B

since 1995 of release

Repair and car operation



Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
- 9. Running gear
   9.1. Introduction
   9.2. Technical characteristics
   9.3. Rotary fists
   9.4. Replacement of forward bearings of a nave
   9.5. Forward bottom frame
   9.6. The lobby is resistant
   9.7. Stabilizer of cross-section stability of a forward suspension bracket
   9.8. Bottom lever of a forward suspension bracket
   9.9. Replacement of the bottom hinge of a forward suspension bracket
   9.10. Back nave
   9.11. Back rack
   9.12. Stabilizer of cross-section stability of a back suspension bracket
   9.13. Top lever of a back suspension bracket
   9.14. Bottom lever of a back suspension bracket
   9.15. Steering wheel
   9.16. Steering column
   9.17. Intermediate shaft of a steering column
   9.18. Replacement of protective covers of steering transfer
   9.19. Steering transfer
   - 9.20. Pump of the amplifier of a steering
      9.20.1. Petrol engines
      9.20.2. Diesel engine of 1,7 l
      9.20.3. Diesel engine of 2,0 l
   9.21. Air removal from steering system with the amplifier
   9.22. Tip of steering draft
   9.23. Steering draft
   9.24. Corners of installation of wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions





9.20. Pump of the amplifier of a steering

9.20.1. Petrol engines

Removal

PERFORMANCE ORDER
1. Remove the air filter.
2. Uncover a filling tank of hydraulic system of the amplifier of a steering and, using a syringe, pump out liquid from a tank.
3. Remove an auxiliary driving belt.
4. Establish the container under the pump of the amplifier of a steering, unscrew a bolt and disconnect the delivery pipeline.
5. Weaken a collar and disconnect a returnable tube from the tank basis.
6. Unscrew four bolts and remove the pump of the amplifier of a steering together with the liquid tank for hydraulic system.

Installation

PERFORMANCE ORDER
Installation is made in sequence, return to removal. Fill in new liquid in hydraulic system and remove air from system.