Opel Vectra B

since 1995 of release

Repair and car operation



Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
- 9. Running gear
   9.1. Introduction
   9.2. Technical characteristics
   9.3. Rotary fists
   9.4. Replacement of forward bearings of a nave
   9.5. Forward bottom frame
   9.6. The lobby is resistant
   9.7. Stabilizer of cross-section stability of a forward suspension bracket
   9.8. Bottom lever of a forward suspension bracket
   9.9. Replacement of the bottom hinge of a forward suspension bracket
   9.10. Back nave
   9.11. Back rack
   9.12. Stabilizer of cross-section stability of a back suspension bracket
   9.13. Top lever of a back suspension bracket
   9.14. Bottom lever of a back suspension bracket
   9.15. Steering wheel
   9.16. Steering column
   9.17. Intermediate shaft of a steering column
   9.18. Replacement of protective covers of steering transfer
   9.19. Steering transfer
   + 9.20. Pump of the amplifier of a steering
   9.21. Air removal from steering system with the amplifier
   9.22. Tip of steering draft
   9.23. Steering draft
   9.24. Corners of installation of wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions





9.21. Air removal from steering system with the amplifier

GENERAL INFORMATION

Air removal from system is necessary for making after a rassoyedineniye of hydraulic elements of system.

PERFORMANCE ORDER
1. Uncover a nutritious tank and check liquid level.
2. At the idle engine slowly several times turn a steering wheel from an emphasis against the stop to remove air from system. Repeat this operation until liquid level in a tank considerably will not decrease.
3. Start the engine and slowly turn a steering wheel from an emphasis against the stop several times to remove air from system. Repeat this operation while bubbles will not cease to appear in a nutritious tank.
4. If at hydraulic system of the amplifier of a steering there is an extraneous noise, it specifies that in system still there is an air.
5. After air removal from system switch off the engine and give the chance to system to be cooled. Check liquid level in a tank which should be up to standard of the top label.