Opel Vectra B
since 1995 of release
Repair and car operation
Vektr B. Opel
+
1.1. Governing bodies and control devices
+
2. Maintenance
+
3. Engines
+
4. Heating, ventilation
+
5. Fuel system
+
6. Systems of start, ignition
+
7. Transmission
+
8. Brake system
-
9. Running gear
9.1. Introduction
9.2. Technical characteristics
9.3. Rotary fists
9.4. Replacement of forward bearings of a nave
9.5. Forward bottom frame
9.6. The lobby is resistant
9.7. Stabilizer of cross-section stability of a forward suspension bracket
9.8. Bottom lever of a forward suspension bracket
9.9. Replacement of the bottom hinge of a forward suspension bracket
9.10. Back nave
9.11. Back rack
9.12. Stabilizer of cross-section stability of a back suspension bracket
9.13. Top lever of a back suspension bracket
9.14. Bottom lever of a back suspension bracket
9.15. Steering wheel
9.16. Steering column
9.17. Intermediate shaft of a steering column
9.18. Replacement of protective covers of steering transfer
9.19. Steering transfer
+
9.20. Pump of the amplifier of a steering
9.21. Air removal from steering system with the amplifier
9.22. Tip of steering draft
9.23. Steering draft
9.24. Corners of installation of wheels
+
10. Body
+
11. Electric equipment
+
12. Main malfunctions
9.13. Top lever of a back suspension bracket
GENERAL INFORMATION
Levers of a back suspension bracket
Removal
PERFORMANCE ORDER
1.
Lift a back part of the car and fix on supports. Remove the corresponding back wheel.
2.
Unscrew the external bolt, the fixing top lever to a back beam.
3.
Unscrew internal bolts of fastening (shooters) and remove the top lever from a back beam.
Installation
PERFORMANCE ORDER
Installation is made in sequence, return to removal, but a tightening of bolts of fastening make after car lowering on wheels.