Opel Vectra B

since 1995 of release

Repair and car operation



Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
- 3. Engines
   - 3.1. Repair of the SOCH engine established in the car
      3.1.1. Introduction
      3.1.2. Technical characteristics
      3.1.3. Check of pressure of compression
      3.1.4. Top dead point (VMT) of the piston of the first cylinder
      3.1.5. Cover of a head of the block of cylinders
      3.1.6. Pulley of a cranked shaft
      3.1.7. Casings of a gear belt
      3.1.8. Gear belt
      3.1.9. Mechanism of a tension of a gear belt and pulleys
      3.1.10. Replacement of a sealing ring of a cam-shaft
      3.1.11. Cam-shaft and cam-shaft cases
      3.1.12. Hydraulic pushers
      3.1.13. Head of the block of cylinders
      3.1.14. Oil pallet
      3.1.15. Oil pump
      3.1.16. Drive flywheel / plate
      3.1.17. Replacement of sealing rings of a cranked shaft
      3.1.18. Suspension bracket of the power unit
   + 3.2. Repair of the DOCH engine established in the car
   + 3.3. Repair of the diesel engine of 1,7 l established in the car
   + 3.4. Repair of the diesel engine of 2,0 l established in the car
   + 3.5. Major maintenance of engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions





3.1.7. Casings of a gear belt

TOP CASING

Removal

PERFORMANCE ORDER
1. Remove a casing of the air filter.
2. Remove an auxiliary driving belt.
3. Unscrew screws of fastening (shooters) of the top casing of a gear belt and remove it from the engine.

Installation

Installation is made in sequence, return to removal.

BOTTOM CASING

Removal

PERFORMANCE ORDER
1. Remove a pulley of a cranked shaft.
2. Remove the top casing of a gear belt, unscrew screws of fastening (shooters) and remove the bottom casing of a gear belt.

Installation

Installation is made in sequence, return to removal.

BACK CASING

Removal

PERFORMANCE ORDER
1. Remove gear pulleys from distributive and cranked shaft and the mechanism of a tension of a gear belt.
2. Unscrew bolts of fastening of a back casing and remove a casing.

Installation

Installation is made in sequence, return to removal.