Opel Vectra B

since 1995 of release

Repair and car operation


Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
- 3. Engines
   - 3.1. Repair of the SOCH engine established in the car
      3.1.1. Introduction
      3.1.2. Technical characteristics
      3.1.3. Check of pressure of compression
      3.1.4. Top dead point (VMT) of the piston of the first cylinder
      3.1.5. Cover of a head of the block of cylinders
      3.1.6. Pulley of a cranked shaft
      3.1.7. Casings of a gear belt
      3.1.8. Gear belt
      3.1.9. Mechanism of a tension of a gear belt and pulleys
      3.1.10. Replacement of a sealing ring of a cam-shaft
      3.1.11. Cam-shaft and cam-shaft cases
      3.1.12. Hydraulic pushers
      3.1.13. Head of the block of cylinders
      3.1.14. Oil pallet
      3.1.15. Oil pump
      3.1.16. Drive flywheel / plate
      3.1.17. Replacement of sealing rings of a cranked shaft
      3.1.18. Suspension bracket of the power unit
   + 3.2. Repair of the DOCH engine established in the car
   + 3.3. Repair of the diesel engine of 1,7 l established in the car
   + 3.4. Repair of the diesel engine of 2,0 l established in the car
   + 3.5. Major maintenance of engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions


5645d6d1 виза в китай санкт-петербург

3.1.10. Replacement of a sealing ring of a cam-shaft
PERFORMANCE ORDER
1. Remove a camshaft pulley.
2. Drill in a sealing ring two openings from two parties. In openings screw in self-cutting screws and flat-nose pliers extend a ring for heads of screws.
3. Clear a nest for a sealing ring.
4. Grease working edges of a new sealing ring with pure engine oil and establish a ring into place, using the corresponding tubular opravka. At installation of a ring pay attention to correctness of an arrangement of working edges which should be directed inside.
5. Establish a camshaft pulley.