Opel Vectra B

since 1995 of release

Repair and car operation



Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
- 7. Transmission
   + 7.1. Coupling
   + 7.2. Mechanical transmission
   - 7.3. Automatic transmission
      7.3.1. Introduction
      7.3.2. Technical characteristics
      7.3.3. Oil replacement in a transmission
      7.3.4. Adjustment of the lever of the selector
      7.3.5. Selector cable
      7.3.6. Selector lever
      7.3.7. Replacement of a sealing ring of the hydrotransformer
      7.3.8. Electric elements of management of a transmission
      7.3.9. Switch of a manner of movement
      7.3.10. Electronic control device
      7.3.11. Sensors of an entrance and conducted shaft of a transmission
      7.3.12. Sensor of temperature of oil of a transmission
      7.3.13. Removal and transmission installation
      7.3.14. Major maintenance of a transmission
   + 7.4. Power shafts
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions





7.3.12. Sensor of temperature of oil of a transmission

GENERAL INFORMATION

The sensor of temperature is screwed in in the basis of a forward part of a transmission.

Removal

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Lift a forward part of the car and fix on supports.
3. Disconnect the electric socket of the sensor located on wires and release sensor conducting from fastening brackets.
4. Unscrew bolts (are specified by shooters) and uncover the sensor.
5. Unscrew the temperature sensor (it is specified by an arrow) from a transmission case. Quickly close a nest for installation of the sensor of temperature by a stopper.

Installation

PERFORMANCE ORDER
Installation is made in sequence, return to removal. Thus on the sensor it is necessary to establish a new sealing ring.