Opel Vectra B

since 1995 of release

Repair and car operation



Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
- 3. Engines
   + 3.1. Repair of the SOCH engine established in the car
   + 3.2. Repair of the DOCH engine established in the car
   + 3.3. Repair of the diesel engine of 1,7 l established in the car
   + 3.4. Repair of the diesel engine of 2,0 l established in the car
   - 3.5. Major maintenance of engines
      3.5.1. Introduction
      + 3.5.2. Technical characteristics
      3.5.3. Removal and installation of the petrol engine together with a transmission
      3.5.4. Removal and installation of the diesel engine together with a transmission
      3.5.5. Engine repair
      3.5.6. Dismantling of a head of the block of cylinders
      3.5.7. Cleaning and survey of a head of the block of cylinders
      3.5.8. Assembly of a head of the block of cylinders
      3.5.9. Removal of pistons with rods
      3.5.10. Removal of a cranked shaft
      3.5.11. Block of cylinders of the engine
      3.5.12. Pistons and rods
      3.5.13. Cranked shaft
      3.5.14. Survey of radical and shatunny bearings
      3.5.15. Engine balance of assembly at major maintenance
      3.5.16. Installation of piston rings
      3.5.17. Choice of bearings
      3.5.18. Installation of a cranked shaft
      3.5.19. Pistons and rods, check of working gaps of shatunny bearings
      3.5.20. Check of a working gap of the bearing of the bottom head of a rod
      3.5.21. Installation of pistons with rods
      3.5.22. Engine start after major maintenance
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions





3.5.15. Engine balance of assembly at major maintenance

GENERAL INFORMATION

Assembly of the engine should be executed in the following order:

– cranked shaft;
– pistons and rods;
– chains and asterisks of the mechanism of a gazoraspredeleniye on the diesel engine of 2,0 l;
– oil pump;
– oil pallet;
– flywheel;
– head of the block of cylinders;
– the mechanism of a tension of a gear belt and pulleys (all models, except the diesel engine of 2,0 l);
– inlet and final collectors;
– hinged knots.