Opel Vectra B

since 1995 of release

Repair and car operation



Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
- 10. Body
   10.1. Introduction
   10.2. Care of a body
   10.3. Care of an upholstery and rugs
   10.4. Repair of insignificant damages of a body
   10.5. Repair of strong damages of a body
   10.6. Front bumper
   10.7. Rear bumper
   10.8. Front grille
   10.9. Cowl
   10.10. Cowl racks
   10.11. Cable of the lock of a cowl
   10.12. Doors
   + 10.13. Door upholstery
   10.14. Internal handle of a door
   10.15. External handle of opening of a forward door
   10.16. External handle of opening of a back door
   10.17. Lock of a forward door
   10.18. Lock of a back door
   10.19. Door window regulator
   10.20. Door glass
   10.21. Trunk lid
   10.22. Trunk lid lock
   10.23. Cylinder of the lock of a trunk lid
   + 10.24. Back door
   10.25. Racks of a back door
   10.26. Lock of a back door
   10.27. Cylinder of the lock of a back door
   + 10.28. System of the central blocking
   + 10.29. Electric window regulators
   + 10.30. External rear-view mirrors
   10.31. Forward seat
   10.32. Pillow of a back seat
   10.33. Back of a back seat
   10.34. Seat belt of a forward seat
   10.35. Lock of a forward seat belt and tension mechanism
   10.36. Seat belt of a back seat and drum
   10.37. Central console
   10.38. Dashboard
+ 11. Electric equipment
+ 12. Main malfunctions


5645d6d1

10.37. Central console

GENERAL INFORMATION

Arrangement of screws of fastening of a protective cover of the lever of gear shifting (1) and screw of fastening of the central console (2)

Removal

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Using a screw-driver as the lever, remove a decorative slip in front of the lever of the hand brake.
3. Release and remove a protective cover of the hand brake.
4. Unscrew screws and remove a protective cover of the lever of the hand brake.
5. Using a thin screw-driver, remove caps of screws of fastening of the central console. Unscrew screws. Screws are located on one from two parties in a forward part of the central console, two in a back part and one in the central part.
6. Move the central console from the panel and remove by means of the cover lever from each party of an ashtray.
7. Remove the holder of an ashtray.
8. Disconnect electric sockets of illumination of an ashtray and the lighter.
9. Unscrew the central screw of fastening of the central console.
10. Completely lift the lever of the hand brake and remove the central console.

Installation

Installation is made in sequence, return to removal.