Opel Vectra B

since 1995 of release

Repair and car operation



Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
- 10. Body
   10.1. Introduction
   10.2. Care of a body
   10.3. Care of an upholstery and rugs
   10.4. Repair of insignificant damages of a body
   10.5. Repair of strong damages of a body
   10.6. Front bumper
   10.7. Rear bumper
   10.8. Front grille
   10.9. Cowl
   10.10. Cowl racks
   10.11. Cable of the lock of a cowl
   10.12. Doors
   + 10.13. Door upholstery
   10.14. Internal handle of a door
   10.15. External handle of opening of a forward door
   10.16. External handle of opening of a back door
   10.17. Lock of a forward door
   10.18. Lock of a back door
   10.19. Door window regulator
   10.20. Door glass
   10.21. Trunk lid
   10.22. Trunk lid lock
   10.23. Cylinder of the lock of a trunk lid
   + 10.24. Back door
   10.25. Racks of a back door
   10.26. Lock of a back door
   10.27. Cylinder of the lock of a back door
   + 10.28. System of the central blocking
   + 10.29. Electric window regulators
   + 10.30. External rear-view mirrors
   10.31. Forward seat
   10.32. Pillow of a back seat
   10.33. Back of a back seat
   10.34. Seat belt of a forward seat
   10.35. Lock of a forward seat belt and tension mechanism
   10.36. Seat belt of a back seat and drum
   10.37. Central console
   10.38. Dashboard
+ 11. Electric equipment
+ 12. Main malfunctions


5645d6d1 Прибор +для проверки зрения на http://www.spetsmedpribor.net.

10.12. Doors

Removal

PERFORMANCE ORDER
1. Hinges of a door are welded on a door and a rack. In need of adjustment use special tools to bend hinges. Open a door and disconnect the electric socket located at a forward end face of a door.
2. Unscrew a bolt of fastening of an emphasis of opening of a door to a door.
3. Remove plastic covers from sharnirny fingers of a door. A drift beat out sharnirny fingers and remove a door.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal. Check that the door lock accurately comes on the shock plate located on a rack.
2. If adjustment is necessary, weaken the screws, fixing a shock plate, move a shock plate and tighten fastening screws.