Opel Vectra B

since 1995 of release

Repair and car operation

Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
- 10. Body
   10.1. Introduction
   10.2. Care of a body
   10.3. Care of an upholstery and rugs
   10.4. Repair of insignificant damages of a body
   10.5. Repair of strong damages of a body
   10.6. Front bumper
   10.7. Rear bumper
   10.8. Front grille
   10.9. Cowl
   10.10. Cowl racks
   10.11. Cable of the lock of a cowl
   10.12. Doors
   + 10.13. Door upholstery
   10.14. Internal handle of a door
   10.15. External handle of opening of a forward door
   10.16. External handle of opening of a back door
   10.17. Lock of a forward door
   10.18. Lock of a back door
   10.19. Door window regulator
   10.20. Door glass
   10.21. Trunk lid
   10.22. Trunk lid lock
   10.23. Cylinder of the lock of a trunk lid
   + 10.24. Back door
   10.25. Racks of a back door
   10.26. Lock of a back door
   10.27. Cylinder of the lock of a back door
   + 10.28. System of the central blocking
   + 10.29. Electric window regulators
   + 10.30. External rear-view mirrors
   10.31. Forward seat
   10.32. Pillow of a back seat
   10.33. Back of a back seat
   10.34. Seat belt of a forward seat
   10.35. Lock of a forward seat belt and tension mechanism
   10.36. Seat belt of a back seat and drum
   10.37. Central console
   10.38. Dashboard
+ 11. Electric equipment
+ 12. Main malfunctions


10.19. Door window regulator


Arrangement of window regulators of a forward door

1. A window regulator with a manual drive
2. A window regulator with an electric drive


1. Remove an upholstery of a door and a protective film.
2. At removal of a forward window regulator on models with a safety cushion remove an arm of the lateral sensor of a safety cushion.
3. Using a sticky tape, fix glass in open situation.
4. On models with electric window regulators disconnect the electric socket of a window regulator.
5. Note position of the adjusting screw of fastening directing glasses and unscrew the screw.
6. Drill rivets of fastening of a window regulator and
7. Take the lever from the channel on the basis of glass.
8. Take a window regulator from a door (on a photo at the left – a window regulator of a forward door, on a photo on the right – back).


1. Installation is made in sequence, return to removal. Fix a window regulator with use of new rivets.
2. Razvaltsuyte of a rivet of fastening of a window regulator special tool.