Opel Vectra B

since 1995 of release

Repair and car operation



Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
- 10. Body
   10.1. Introduction
   10.2. Care of a body
   10.3. Care of an upholstery and rugs
   10.4. Repair of insignificant damages of a body
   10.5. Repair of strong damages of a body
   10.6. Front bumper
   10.7. Rear bumper
   10.8. Front grille
   10.9. Cowl
   10.10. Cowl racks
   10.11. Cable of the lock of a cowl
   10.12. Doors
   - 10.13. Door upholstery
      10.13.1. Forward door
      10.13.2. Back door
   10.14. Internal handle of a door
   10.15. External handle of opening of a forward door
   10.16. External handle of opening of a back door
   10.17. Lock of a forward door
   10.18. Lock of a back door
   10.19. Door window regulator
   10.20. Door glass
   10.21. Trunk lid
   10.22. Trunk lid lock
   10.23. Cylinder of the lock of a trunk lid
   + 10.24. Back door
   10.25. Racks of a back door
   10.26. Lock of a back door
   10.27. Cylinder of the lock of a back door
   + 10.28. System of the central blocking
   + 10.29. Electric window regulators
   + 10.30. External rear-view mirrors
   10.31. Forward seat
   10.32. Pillow of a back seat
   10.33. Back of a back seat
   10.34. Seat belt of a forward seat
   10.35. Lock of a forward seat belt and tension mechanism
   10.36. Seat belt of a back seat and drum
   10.37. Central console
   10.38. Dashboard
+ 11. Electric equipment
+ 12. Main malfunctions


5645d6d1

10.13. Door upholstery

10.13.1. Forward door

Removal

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Open a forward door and, having pulled on itself, remove the handle of adjustment of an external mirror.
3. Then, using a screw-driver edge as the lever, remove a decorative overlay of the handle of a mirror.
4. Remove a noise isolation.
5. Using a screw-driver edge as the lever, remove the bottom overlay of the internal handle of opening of a door.
6. Also using a screw-driver, remove a cap or the mirror switch with electroheating from the top party of the handle of opening of a door.
7. Using a screw-driver, remove a loudspeaker lattice.
8. Unscrew screws of fastening of the handle of a door.
9. Remove the door handle.
10. Disconnect wires from a loudspeaker.
11. On models with a manual window regulator completely close a window and note an arrangement of the handle of a window regulator. Release a bracket of fastening and remove the handle. The bracket is released if to insert a pure fabric between the handle and an upholstery of a door and, stretching a fabric opposite to the bracket ends, hook on a bracket and release it. Thus it is necessary to pull the handle on itself that she after release of a bracket acted in film with шлицов a window regulator.
12. Unscrew screws at the basis of an upholstery of a door.
13. Then using a screw-driver with a wide edge, separate a door upholstery from a door.
14. If it is necessary, remove a protective film from a door.

Installation

Installation is made in sequence, return to removal.