Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
- 8. Brake system
8.1. Introduction
8.2. Technical characteristics
8.3. Pumping of hydraulic brake system
8.4. Brake pipelines and hoses
8.5. Replacement of forward brake shoes
8.6. Replacement of back brake shoes on disk brakes
8.7. Replacement of back brake shoes on drum-type brakes
8.8. Replacement of brake shoes of the hand brake
8.9. Lobbies and back brake disks
8.10. Forward brake disk
8.11. Back brake disk
8.12. Back brake drum
8.13. Forward support
8.14. Back support
8.15. Back working brake cylinder
8.16. Main brake cylinder
8.17. Brake pedal
8.18. Vacuum amplifier of brakes
8.19. Unilateral valve of the vacuum amplifier of brakes
8.20. Adjustment of the hand brake
8.21. Lever of the hand brake
8.22. Cable of the hand brake
8.23. Anti-blocking system of brakes (ABS)
+ 8.24. Elements of anti-blocking system of brakes
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions
8.4. Brake pipelines and hoses
| GENERAL INFORMATION |
Fastening of a brake hose of a back wheel
Brake tubes are applied to transfer of brake liquid from the main brake cylinder to wheel brake cylinders. Connections of tubes with brake cylinders and switching centers it is made by konusny couplings. The ends of tubes are pressed out and have a cone-shaped form for the corresponding size of konusny carving openings in brake cylinders or switching centers.
Before obzhatiy the ends of tubes the lock nut which after a vvinchivaniye of a cone-shaped surface in the konusny basis of a carving opening presses is put on them and pressurizes a tube.
Brake hoses carry out mobile communications between mobile and motionless parts of the car. For reduction of losses of brake liquid at removal of working brake cylinders clips for a perezhatiya of brake hoses are used.