Opel Vectra B

since 1995 of release

Repair and car operation



Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
- 8. Brake system
   8.1. Introduction
   8.2. Technical characteristics
   8.3. Pumping of hydraulic brake system
   8.4. Brake pipelines and hoses
   8.5. Replacement of forward brake shoes
   8.6. Replacement of back brake shoes on disk brakes
   8.7. Replacement of back brake shoes on drum-type brakes
   8.8. Replacement of brake shoes of the hand brake
   8.9. Lobbies and back brake disks
   8.10. Forward brake disk
   8.11. Back brake disk
   8.12. Back brake drum
   8.13. Forward support
   8.14. Back support
   8.15. Back working brake cylinder
   8.16. Main brake cylinder
   8.17. Brake pedal
   8.18. Vacuum amplifier of brakes
   8.19. Unilateral valve of the vacuum amplifier of brakes
   8.20. Adjustment of the hand brake
   8.21. Lever of the hand brake
   8.22. Cable of the hand brake
   8.23. Anti-blocking system of brakes (ABS)
   + 8.24. Elements of anti-blocking system of brakes
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions





8.11. Back brake disk

Removal

PERFORMANCE ORDER
1. Remove back brake shoes.
2. Remove a back support, without disconnecting from it a brake hose. Using a soft wire, tie up a back support to a back rack.
3. Unscrew the fastening screw.
4. Remove a back brake disk from a nave. If blocks of the hand brake interfere with removal of a brake disk, insert a screw-driver through an opening in a nave and, turning a wheel of an adjusting level, compress brake shoes of the hand brake.

Installation

Installation is made in sequence, return to removal.