Opel Vectra B

since 1995 of release

Repair and car operation

Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
- 5. Fuel system
   + 5.1. Fuel system of petrol engines
   - 5.2. Fuel systems of the diesel engine
      5.2.1. Introduction
      5.2.2. Technical characteristics
      5.2.3. Air filter and air inlet channels
      5.2.4. Accelerator pedal
      5.2.5. Filling and pumping of fuel system
      5.2.6. Fuel level sensor
      5.2.7. Fuel tank
      5.2.8. Check and adjustment of the maximum turns
      5.2.9. Start of the cold engine
      + 5.2.10. Electric knots of system of injection
      5.2.11. Fuel pump of a high pressure
      5.2.12. Check of the moment of injection of fuel
      5.2.13. Adjustment of the moment of injection of fuel
      5.2.14. Fuel nozzles
      5.2.15. Turbonagnetatel
      5.2.16. Heat exchanger
      5.2.17. Inlet collector
      5.2.18. Final collector
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions

5.2.8. Check and adjustment of the maximum turns

Engines of 1,7 l

PERFORMANCE ORDER

1. Warm up the engine to normal working temperature.
2. Press an accelerator pedal against the stop no more than for 2-3 seconds and check that the maximum turns of the engine correspond to technical requirements.
	3. If adjustment is required, switch off the engine, weaken a lock-nut and turn the screw of adjustment of the maximum turns (1) and repeatedly tighten a lock-nut.
4. Repeatedly check the maximum turns of the engine.

Engines of 2 l

The maximum turns of the engine are established by the ECU block and cannot be adjusted.