Opel Vectra B

since 1995 of release

Repair and car operation



Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
- 3. Engines
   + 3.1. Repair of the SOCH engine established in the car
   + 3.2. Repair of the DOCH engine established in the car
   + 3.3. Repair of the diesel engine of 1,7 l established in the car
   - 3.4. Repair of the diesel engine of 2,0 l established in the car
      3.4.1. Introduction
      3.4.2. Technical characteristics
      3.4.3. Check of pressure of compression
      3.4.4. Top dead point (VMT) of the piston of the first cylinder
      3.4.5. Check and adjustment of the mechanism of a gazoraspredeleniye
      3.4.6. Cover of a head of the block of cylinders
      3.4.7. Pulley of a cranked shaft
      3.4.8. Chain cover
      3.4.9. Natyazhiteli of a chain
      3.4.10. Chains and asterisks
      3.4.11. Camshafts and pushers
      3.4.12. Head of the block of cylinders
      3.4.13. Oil pallet
      3.4.14. Oil pump
      3.4.15. Oil radiator
      3.4.16. Replacement of sealing rings of a cranked shaft
      3.4.17. Flywheel
      3.4.18. Suspension brackets of the power unit
   + 3.5. Major maintenance of engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions





3.3.17. Flywheel

Removal

PERFORMANCE ORDER
1. Remove a transmission and coupling.
2. Fix a flywheel from a provorachivaniye, having established a clamp on a gear wreath of a flywheel.
3. Put on a cranked shaft and a flywheel a combination label.
4. Unscrew bolts and remove a flywheel.

Check

PERFORMANCE ORDER
Check a flywheel on wear from coupling and a condition of teeths of a gear wreath of a flywheel.

Installation


Prevention

At installation of a flywheel it is necessary to use new bolts.


PERFORMANCE ORDER
1. Clear interfaced surfaces of a flywheel and a cranked shaft.
2. Establish a flywheel according to earlier made labels and screw in new bolts of fastening of a flywheel.
3. Fix a flywheel from a provorachivaniye and tighten in some stages bolts of fastening of a flywheel.
4. Establish coupling and a transmission.