Opel Vectra B

since 1995 of release

Repair and car operation



Vektr B. Opel
- 1.1. Governing bodies and control devices
   1.2. Combination of devices
   1.3. Control bulbs
   1.4. Counter of the passable way and hours
   1.5. Triple-Info-display
   1.6. Multi-Info-display
   1.7. The Multi-Info-display - Check-control
   1.8. The Multi-Info-display - the Board computer
   1.9. Heating and ventilation system
   1.10. Conditioner
   1.11. Heating
   1.12. Electronic climate control
   1.13. TC system
   1.14. Cruise control
   1.15. Catalyst
   1.16. Signaling device of electronic system of the engine
   1.17. System of production of the fulfilled gases
   1.18. Automatic transmission
   1.19. Instructions on driving
   1.20. Economy of fuel
   1.21. Fuel grade
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions


5645d6d1

1.7. The Multi-Info-display – Check-Sontrol

GENERAL INFORMATION

 

Check-Control carries out control over level of liquids, thickness of frictional overlays of forward disk brakes, functionality of an automatic transmission and the most important lamps of external lighting, including electroconducting and safety locks. At control of lamps malfunction is displayed only in case of inclusion of the corresponding chain.

After inclusion of ignition automatic check of all Check-Control functions is carried out.

If all functions over which control as it should be is carried out, Bremslicht Prufung inscription (check of brake fires) dies away after the first pressing a brake pedal.

Messages on malfunctions are displayed on the display. CHECK inscription in addition burns. At several malfunctions of the message on them are deduced one after another.

Some messages are displayed on the display in the form of reductions.

Display of faults

 – Olstand prufen (to check oil level)

Oil level in system of greasing of the engine is too low. As soon as possible to check oil level, to add oil.

 – Kuhlmittel Stand (level of cooling liquid)

Level of cooling liquid in a compensatory tank is too low.

 – Automatik Getriebe (an automatic transmission)

The transmission is not switched any more automatically. To switch manually.

 – Bremsbelag (overlay of brake shoes)

Overlays of brake shoes of forward disk brakes are worn-out till the minimum thickness.

 – Bremslicht Sicherung (a safety lock for brake fires)

Fused a safety lock for brake fires. To replace a safety lock only after malfunction elimination.

 – Bremslicht (brake fires)

 – Fahrlicht Rucklicht (light of headlights, light of lamps of a backing)

Headlights of a passing beam or backing failed.

 – Waschwasser Stand (level of flushing liquid)

Liquid level in a tank of a stekloomyvatel is too low.

If messages on malfunctions are deduced, for indication of a condition of the board computer the display is blocked.

It is necessary to confirm the message on malfunction with key S or R pressing on the lever of the switch of a screen wiper. At a conclusion of several messages on malfunctions to confirm with consecutive pressing.

After confirmation the message on the display is erased. The display is free for indication of messages of the board computer. CHECK inscription on the right on the display continues to burn, and reminds that there are one or several malfunctions.

Bremslicht Sicherung messages (a safety lock for brake fires), and Fahrlicht Rucklicht (light of headlights, light of lamps of a backing) are deduced by Bremslicht (brake fires) again in 15 minutes after confirmation.

After switching off and the inclusions of the ignition which have been written down in memory of the message, serially are deduced on the display.

After elimination of malfunctions of the message are automatically erased.