Opel Vectra B

since 1995 of release

Repair and car operation



Vektr B. Opel
- 1.1. Governing bodies and control devices
   1.2. Combination of devices
   1.3. Control bulbs
   1.4. Counter of the passable way and hours
   1.5. Triple-Info-display
   1.6. Multi-Info-display
   1.7. The Multi-Info-display - Check-control
   1.8. The Multi-Info-display - the Board computer
   1.9. Heating and ventilation system
   1.10. Conditioner
   1.11. Heating
   1.12. Electronic climate control
   1.13. TC system
   1.14. Cruise control
   1.15. Catalyst
   1.16. Signaling device of electronic system of the engine
   1.17. System of production of the fulfilled gases
   1.18. Automatic transmission
   1.19. Instructions on driving
   1.20. Economy of fuel
   1.21. Fuel grade
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions


5645d6d1

1.12. Electronic climate control

GENERAL INFORMATION

Electronic climate control provides under any weather conditions, any external temperature and at any time years the maximum comfort.

For ensuring constant and pleasant climate in the car according to external weather conditions the temperature of arriving air, amount of air and air distribution automatically change.

The refrigerating compressor of climate control cools air and takes away moisture.

At the switched-on refrigerating compressor at the conditioner power consumption of such size which leads to fuel consumption increase. If there is no need for the refrigerating compressor, it is necessary to press an ESO key.

The filter of purification of air clears air arriving outside of a dust and soot, and also from pollen and dispute.

With installation on an automatic mode of conditioning movement practically always is possible. If necessary it is possible to adjust climate control manually.

Climate control works only at the working engine.

Automatic mode

The main installations for the maximum comfort:

 – to press the AUTO key, the display and indication of function are switched on;
 – to open all nozzles обдува;
 – to set on the display temperature keys „+" or „. -" from 22 ° With to 24 ° Page.

The big or smaller temperature can be if necessary set.

Manual installation

Under special conditions (e.g., the frozen or misted-over glasses, receipt of unpleasant smells outside) can be established to climate control function manually.

After repeated inclusion of ignition climate control is in a mode chosen before installations.

If necessary, to establish an operating mode as follows:

Drying and defrosting of glasses

To press (inclusion control), indication of the AUTO mode will go out.

Temperature and having blown will be established automatically, glasses are defrozen and dry in the fastest way.

Return to an automatic mode: to press or AUTO.

Air circulation mode

To press (inclusion control), indication of the AUTO mode will go out.

Inclusion at receipt of unpleasant smells outside. The system of air circulation prevents intake of external air, air in salon of the car circulates.

The system of air circulation should be included only for some time since over time quality of air in salon worsens.

Return to an automatic mode: to press or AUTO.

Automatic mode without cooling (economy of fuel).

ESO to Press (inclusion control), indication of the AUTO mode will go out.

To include for economy of fuel. In this mode the refrigerating compressor is switched off.

Arriving air is not cooled and does not dry, because of it the comfort which provides climate control is limited.

Return to an automatic mode: to press ESO or AUTO.

The set temperature

The set temperature can be established by keys „+" or „-" on values between 17 ° With and 27 ° to Page.

At installation below 17 ° With it is displayed on the LO display: climate control works continuously with the maximum capacity of cooling, regulation of temperature is not carried out.

At installation above 27 ° With it is displayed on the HI display: climate control works continuously with the maximum heatproductivity, regulation of temperature is not carried out.

Air distribution

By pressing one of the following keys (indication of the AUTO mode will go out) it is carried out:

air distribution to the top space;
air distribution to a windshield, to forward lateral glasses both to forward and to back space for feet;
air distribution to the top space, both to forward and to back space for feet;
air distribution to forward and to back space for feet.

Return to an automatic mode: to press the corresponding key repeatedly or to press AUTO.

Amount of air

To press on the right or at the left, indication of the AUTO mode will go out, frequency of rotation of the fan обдува raises or goes down. On the display between keys K the step обдува is displayed.

Return to an automatic mode: to press AUTO, on the display between keys it is displayed And.

Climate control switching off

OFF to Press, all functions of climate control are switched off.

Installations of distribution of air remain in the provision of earlier chosen provisions.

Access of external air can be stopped by pressing a key.

For reasons of comfort to disconnect climate control (management of heating, obduvy and cooling) follows only in case of emergence in malfunction system.

Climate control inclusion: to press OFF or AUTO.

General instructions

Climate control works more effectively if windows and the roof hatch are closed. If the car salon strongly heated up after long influence of sunshine, to open for some time of a window that the heated-up air could disappear quicker.

For continuous work it is not necessary to close openings for sensors in group of switches of climate control and between openings of supply of air before a windshield.

At the switched-on conditioner the condensate acting on the bottom of the car is formed.

Servicing

In case of unusual work of climate control: approximately within 5 seconds at the same time to hold pressed the AUTO and OFF keys, there will be a synchronization of auxiliary engines, the fan обдува thus for some time will stop.