Opel Vectra B

since 1995 of release

Repair and car operation



Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
- 4. Heating, ventilation
   - 4.1. Cooling system
      4.1.1. Introduction
      4.1.2. Technical characteristics
      4.1.3. Hoses of system of cooling
      4.1.4. Radiator
      4.1.5. Thermostat
      4.1.6. Radiator fan
      4.1.7. The additional fan of a radiator on diesel engines of 1,7 l
      4.1.8. The additional electropump of cooling on diesel engines of 1,7 l
      - 4.1.9. Electric sensors
         4.1.9.1. The sensor of temperature of cooling liquid
         4.1.9.2. Temperature-sensitive element of the fan of a radiator
         4.1.9.3. The sensor of level of cooling liquid
      4.1.10. Water pump
   + 4.2. Heating system and ventilation
   4.3. Air central air
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions





4.1.9. Electric sensors

4.1.9.1. The sensor of temperature of cooling liquid

Removal

PERFORMANCE ORDER
1. Merge cooling liquid from cooling system.
Petrol SOCH engine of 1,6 l
2. Unscrew a bolt and remove draft of the jack of a torque on the right side of the engine.
3. Disconnect the electric socket from the sensor of temperature of the cooling liquid, the thermostat located on a casing on the right side of the block of cylinders.
4. Unscrew and remove the sensor from a thermostat casing.
Petrol DOCH 1.6, 1.8 and 2,0 engines of l
5. Remove the ignition block.
6. Remove the electric socket from the sensor of temperature of the cooling liquid, located on a casing on the left side of a head of the block of cylinders.
7. Unscrew the sensor.
Diesel engines
8. The sensor of temperature is located on a thermostat casing. On the engine of 1,7 l the casing is on the left end of a head of the block of cylinders. On engines of 2,0 l the sensor is on the right forward part of a head of the block of cylinders (it is specified by an arrow).
9. Merge cooling liquid from cooling system.
10. Disconnect the electric socket and unscrew the sensor from a thermostat casing.

Installation

PERFORMANCE ORDER
Installation is made in sequence, return to removal. Fill in cooling liquid in cooling system.