Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
- 4. Heating, ventilation
- 4.1. Cooling system
4.1.1. Introduction
4.1.2. Technical characteristics
4.1.3. Hoses of system of cooling
4.1.4. Radiator
4.1.5. Thermostat
4.1.6. Radiator fan
4.1.7. The additional fan of a radiator on diesel engines of 1,7 l
4.1.8. The additional electropump of cooling on diesel engines of 1,7 l
+ 4.1.9. Electric sensors
4.1.10. Water pump
+ 4.2. Heating system and ventilation
4.3. Air central air
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions
|
SOCH ENGINES OF 1,6 L
Prevention
At installation of the thermostat it is necessary to establish a new sealing ring.
Removal
| PERFORMANCE ORDER |
| 1. Remove a weight wire from the accumulator. |
| 2. Merge cooling liquid from cooling system. |
| 3. Weaken a collar and disconnect the top hose from a thermostat casing on the right side of the engine. |
| 4. Remove a gear belt, an intermediate pulley, a pulley of a camshaft and a back casing of a gear belt. |
| 5. Unscrew bolts and uncover the thermostat a head of the block of cylinders. |
| 6. Take the thermostat from a casing and remove a sealing ring. |
|
Check
|
|
Rough check of the thermostat can be carried out, having suspended it on a thread in the glass vessel filled with water and heating up water to boiling. When boiling water the thermostat should open. Otherwise replace it. |
The temperature of opening of the thermostat is put on the thermostat.
The thermostat which is not closed when cooling water, also is subject to replacement.
Installation
| PERFORMANCE ORDER |
| 1. Clear interfaced surfaces of a cover of the thermostat and a head of the block of cylinders. |
| 2. Establish the thermostat in a head of the block of cylinders together with a new sealing ring. |
| 3. Establish a cover of the thermostat and fix bolts. |
| 4. Establish a back casing of a gear belt, a camshaft pulley, a gear belt and an intermediate pulley. |
| 5. Connect the top hose to the thermostat and fix a collar. |
| 6. Fill in cooling liquid in cooling system. |
| 7. Connect the accumulator. |
|
PETROL DOCH 1.6, 1.8 AND 2,0 ENGINES L
Removal
| PERFORMANCE ORDER |
| 1. Remove a weight wire from the accumulator. |
| 2. Merge cooling liquid from cooling system. |
| 3. Weaken a collar and remove the top hose from a thermostat cover. On engines of 1,6 l the cover of the thermostat is established to the case attached by bolts by the forward end of the engine. On l engines 1,8 and 2,0 a cover the thermostat fastens bolts directly to a head of the block of cylinders. Thus it is necessary to remove in addition small hose. |
|
4. Unscrew bolts and uncover the thermostat in which the thermostat (on a photo – the thermostat of the petrol DOCH engine of 1,6 l) is fixed. |
| |
5. On engines of 1,6 l remove a sealing ring. |
| 6 whether. On engines 1,8 of 2,0 l remove laying. |
|
Check
See. SOCH engines of 1,6 l
Installation
| PERFORMANCE ORDER |
| 1. Clear interfaced surfaces of a cover and a thermostat casing. |
| 2. Establish a thermostat cover together with the thermostat and a sealing ring or laying and fix bolts. |
| 3. Connect the top hose to the thermostat and fix a collar. |
| 4. Fill in cooling liquid in cooling system. |
| 5. Connect the accumulator. |
|
DIESEL ENGINE OF 1.7 L
Removal
| PERFORMANCE ORDER |
| 1. Remove a weight wire from the accumulator. |
| 2. Merge cooling liquid from cooling system. |
| 3. Remove the accumulator and an accumulator support. |
|
4. Weaken a collar of fastening of a hose. |
|
5. Disconnect the top hose from a cover of the thermostat located on the left side of a head of the block of cylinders. |
|
6. Unscrew bolts of fastening of a cover of the thermostat. |
|
7. Uncover the thermostat together with the thermostat. Remove laying. |
|
Check
See. SOCH engines of 1,6 l
Installation
| PERFORMANCE ORDER |
| 1. Clear interfaced surfaces of a cover and a thermostat casing. |
| 2. Establish the thermostat in a casing ventilating openings up. |
| 3. Establish a cover together with new laying and fix bolts. |
| 4. Establish the top hose and fix a collar. |
| 5. Establish a support of the accumulator and the accumulator. |
| 6. Fill in cooling liquid in cooling system. |
| 7. Connect the accumulator. |
|
DIESEL ENGINE OF 2 L
Removal
| PERFORMANCE ORDER |
| 1. Remove a weight wire from the accumulator. |
| 2. Merge cooling liquid from cooling system. |
| 3. Lift a forward part of the car and fix on supports. |
| 4. Remove a mudguard from under the engine. |
| 5. To remove the standard thermostat located in the forward party of a head of the block of cylinders, at first disconnect electric sockets from the temperature sensor, then remove three hoses, unscrew bolts and remove a casing in which the thermostat is established. |
|
Check
See. SOCH engines of 1,6 l
Installation
| PERFORMANCE ORDER |
| 1. Clear interfaced surfaces of a cover of the thermostat and a head of the block of cylinders. |
| 2. Establish a thermostat cover with new laying and fix bolts. |
| 3. Repeatedly connect hoses and electric sockets. |
| 4. Establish a mudguard and lower the car. |
| 5. Fill in cooling liquid in cooling system. |
| 6. Connect the accumulator. |
|
|
|
Heyətinizi dəstəkləmək və onları uğurlandırmaq üçün Mostbet -in mükəmməl bir yolu var.