Opel Vectra B

since 1995 of release

Repair and car operation



Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
- 4. Heating, ventilation
   - 4.1. Cooling system
      4.1.1. Introduction
      4.1.2. Technical characteristics
      4.1.3. Hoses of system of cooling
      4.1.4. Radiator
      4.1.5. Thermostat
      4.1.6. Radiator fan
      4.1.7. The additional fan of a radiator on diesel engines of 1,7 l
      4.1.8. The additional electropump of cooling on diesel engines of 1,7 l
      + 4.1.9. Electric sensors
      4.1.10. Water pump
   + 4.2. Heating system and ventilation
   4.3. Air central air
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions


5645d6d1

4.1.10. Water pump

PETROL ENGINES OF 1,6 L

Removal

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Merge cooling liquid from cooling system.
3. Remove a gear belt and a back casing of a gear belt.
4. Unscrew three bolts of fastening and remove the water pump. Remove a sealing ring from the water pump.

Installation


PERFORMANCE ORDER
1. Check that interfaced surfaces of the water pump and the block of cylinders pure and dry. Apply a thin film hermetic on an interfaced surface of the block of cylinders.
2. Establish a new sealing ring on the water pump and establish the pump in the block of cylinders. On SOCH engines check that ledges on the pump and the block of cylinders are combined. On DOCH engines combine edge of a ledge of the pump with a label on the block of cylinders (it is specified by an arrow).
3. Establish bolts of fastening of the water pump and tighten them the demanded moment.
4. Establish a back casing of a gear belt and a gear belt.
5. Fill in cooling liquid in cooling system.
6. Connect the accumulator.

PETROL DOCH 1,8 AND 2,0 ENGINES L

Removal

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Merge cooling liquid from cooling system.
3. Remove a gear belt and the tension mechanism.
4. Unscrew three bolts of fastening and remove the pump. Remove a sealing ring from the pump.

Installation

PERFORMANCE ORDER
1. Check that interfaced surfaces of the pump and the block of cylinders pure and dry and apply a thin film lubricant on the basis of silicone on an interfaced surface of the block of cylinders.
2. Establish a new sealing ring on the pump and establish the pump in the block of cylinders. Check that ledges on the pump and the block of cylinders are combined.
3. Establish bolts of fastening of the pump and tighten them the demanded moment.
4. Establish a back casing of a gear belt and a gear belt.
5. Connect the accumulator.
6. Fill in cooling liquid in cooling system.

DIESEL ENGINE OF 1,7 L

Removal

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Merge cooling liquid from cooling system.
3. Remove an auxiliary driving belt.
4. Fix a pulley of the water pump from a provorachivaniye, unscrew nuts of fastening and remove a pulley from a pump flange.
5. Unscrew bolts of fastening of the pump and remove the pump from the block of cylinders. Remove laying.

Installation

PERFORMANCE ORDER
1. Check that interfaced surfaces of the pump and the block of cylinders pure and dry.
2. Establish the pump on the block of cylinders together with new laying and fix bolts.
3. Establish a pulley of the water pump.
4. Establish and adjust a tension of an auxiliary driving belt.
5. Connect the accumulator.
6. Fill in cooling liquid in cooling system.

DIESEL ENGINE OF 2,0 L

Removal

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Merge cooling liquid from cooling system.
3. Remove an auxiliary driving belt.
4. Remove a casing of the air filter.
5. Lift a forward part of the car and fix on supports.
6. Remove the bottom mudguard of the engine.
7. Unscrew a nut from the top part of the right suspension bracket of the power unit.
8. Using a jack, raise the engine to release a place for removal of the water pump.
9. Fix a pulley of the water pump from a provorachivaniye and unscrew bolts of fastening of a pulley. Remove a pulley from the pump.
10. Unscrew three bolts of fastening of the water pump.
11. Remove the water pump from the block of cylinders of the engine.
12. Remove a sealing ring from the pump.

Installation

PERFORMANCE ORDER
1. Check that interfaced surfaces of the pump and the block of cylinders pure and dry, and apply a thin film lubricant on the basis of silicone to an interfaced surface of the block of cylinders.
2. Establish a new sealing ring on the water pump.
3. Establish the pump in the block of cylinders and fix bolts.
4. Establish a pulley of the water pump.
5. Lower the engine and screw up a nut of fastening of the right suspension bracket of the power unit.
6. Establish a mudguard and lower the car.
7. Establish a casing of the air filter.
8. Establish and adjust a tension of an auxiliary driving belt.
9. Connect the accumulator.
10. Fill in cooling liquid in cooling system.