Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
- 6. Systems of start, ignition
+ 6.1. Charging system
- 6.2. Start system
6.2.1. Introduction
6.2.2. Technical characteristics
6.2.3. Starter
6.2.4. Sensor of pressure of oil
6.2.5. Sensor of level of oil
+ 6.3. Ignition system
+ 6.4. System of prestarting heating of diesel engines
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions
|
PETROL ENGINES OF 1,6 L
Removal
| PERFORMANCE ORDER |
| 1. The sensor of level of oil is located on a back part of the oil pallet. |
| 2. For access to the sensor lift a forward part of the car and fix on supports. Remove an engine mudguard. |
| 3. Merge engine oil in the pure container and establish a masloslivny stopper, having tightened it the demanded moment. |
| 4. Disconnect the electric socket from the sensor. |
| 5. On engines with the steel stamped pallet unscrew bolts of fastening and remove the sensor together with laying. |
| 6. On engines with the cast aluminum pallet unscrew the sensor. |
|
Installation
Installation is made in sequence, return to removal.
OTHER MODELS
Removal
| PERFORMANCE ORDER |
| 1. The sensor of level of oil is located in the oil pallet which is necessary for removing previously. |
| 2. After removal of the pallet disconnect the electric socket from the sensor. |
| 3. Unscrew screws and remove the sensor from the oil pallet. |
|
Installation
| PERFORMANCE ORDER |
| Installation is made in sequence, return to removal. Thus it is necessary to put the means interfering unscrewing of bolts on a carving of bolts of fastening of the sensor. |
|
|
|
