Opel Vectra B

since 1995 of release

Repair and car operation



Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
- 4. Heating, ventilation
   + 4.1. Cooling system
   - 4.2. Heating system and ventilation
      4.2.1. Introduction
      - 4.2.2. Elements of system of heating
         4.2.2.1. Resistor of the engine of the fan
         4.2.2.2. Engine of the supercharger of a heater
         4.2.2.3. Control panel heater
         4.2.2.4. Heater casing
         4.2.2.5. Heater radiator
         4.2.2.6. Heater switch
         4.2.2.7. Vacuum tank
         4.2.2.8. Vacuum chamber
         4.2.2.9. Electronic control unit climate
         4.2.2.10. Electronic sensor of temperature
         4.2.2.11. Electronic regulator of the fan
   4.3. Air central air
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions


5645d6d1

4.2.2.5. Heater radiator

Removal

PERFORMANCE ORDER
1. In a motor compartment press hoses of supply of cooling liquid to a heater radiator.
2. On diesel engines of 2,0 l disconnect the electric socket from the fuel pump.
3. For access improvement on diesel engines of 2,0 l remove the fuel filter.
4. Disconnect hoses of supply of cooling liquid from unions of a radiator of a heater, pressing a branch pipe and moving a blocking ring.
5. Close jams branch pipes of hoses (the locations of jams are specified by shooters).
6. Remove the central console.
7. Remove an arm supporting the lower central part of the dashboard (it is specified by an arrow).
8. Remove the lower part of a branch pipe of supply of air in the lower part of salon.
9. Unscrew the screw of fastening of a branch pipe of supply of air.
10. Remove a branch pipe of supply of air.
11. Remove a suspension bracket of air lines.
12. Using a screw-driver, освободжите brackets of fastening of a cover of a radiator of heating. On models with air conditioning the cover is fixed by bolts.
13. Uncover a heater radiator.
14. Take a heater radiator from a casing. On models with air conditioning before extraction of a radiator of a heater move it to the right.

Installation

PERFORMANCE ORDER
Installation is made in sequence, return to removal. If brackets of fastening of a cover of a radiator of a heater are broken, drill four openings in a cover and fix it self-cutting screws. Before cover installation strongly press a heater radiator into a casing. Add cooling liquid in cooling system.