Opel Vectra B

since 1995 of release

Repair and car operation



Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
- 4. Heating, ventilation
   + 4.1. Cooling system
   - 4.2. Heating system and ventilation
      4.2.1. Introduction
      - 4.2.2. Elements of system of heating
         4.2.2.1. Resistor of the engine of the fan
         4.2.2.2. Engine of the supercharger of a heater
         4.2.2.3. Control panel heater
         4.2.2.4. Heater casing
         4.2.2.5. Heater radiator
         4.2.2.6. Heater switch
         4.2.2.7. Vacuum tank
         4.2.2.8. Vacuum chamber
         4.2.2.9. Electronic control unit climate
         4.2.2.10. Electronic sensor of temperature
         4.2.2.11. Electronic regulator of the fan
   4.3. Air central air
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions


5645d6d1

4.2.2.4. Heater casing

Removal

PERFORMANCE ORDER
1. Remove the dashboard.
2. Remove forward doors.
3. Unscrew the bolts, the fixing external ends of a beam of management to forward racks. Then remove two top directing and unscrew bolts with the left carving since the beam ends.
4. Remove the bottom distributor of air.
5. On models with central air of air remove a cooler. The expert with use of the special equipment should remove a cooler.
6. On models with air conditioning in a motor compartment disconnect hoses from the evaporator and remove drainage consolidation.
7. Working in a motor compartment, press the hoses submitting cooling liquid to the radiator of a heater.
8. Disconnect hoses from the union of a radiator of a heater, pressing a branch pipe and moving a blocking ring.
9. Unscrew three bolts, fixing a heater casing to a partition of a motor compartment. Bolts are available from a motor compartment.
10. Remove a casing of the filter of pollen. For this purpose it is necessary to remove the engine of a screen wiper and to disconnect vacuum hoses from a casing. On models with diesel engines of 2,0 l it is also necessary to remove the sensor of temperature of external air.
11. On models with electronic control of air temperature disconnect the socket of a plait of wires for a food of engines of the servomotor and the fan.
12. Take a heater casing from car salon.

Installation

Installation is made in sequence, return to removal.