1. Check a condition of driving belts on all their length. Also check pulleys on existence of notches, cracks, deformation and corrosion. |
2. Remove a casing of the air filter. |
Driving belt of the compressor of air conditioning on engines of 1,7 l |
3. Weaken a bolt of a pulley of the mechanism of a tension and weaken a belt tension, rotating a regulator bolt. Remove a belt from pulleys. |
4. Establish a new belt on pulleys. A tension of a belt carry out, using a regulator bolt. Thus the belt deflection from pressing a hand thumb on long branches of a belt should make about 10 mm. |
5. Tighten the demanded moment a bolt of fastening of a pulley of the mechanism of a tension and establish a casing of the air filter. |
Driving belt of the pump of the amplifier of a steering of the engine of 1,7 l |
6. On models with air conditioning remove a driving belt of the compressor. |
7. Weaken bolts of fastening of the pump, weaken a belt and remove it from pulleys. |
8. Establish a new belt on pulleys. A tension of a belt carry out pump moving. Thus the belt deflection by pressing a hand thumb on a long branch of a belt should make 10 mm. |
9. Establish a driving belt of the compressor of air conditioning and a casing of the air filter. |
Driving belt of the generator on the engine of 1,7 l |
10. Lift a forward part of the car and fix on supports. Remove the right forward wheel. |
11. Remove a driving belt of the pump of the amplifier of a steering. |
12. Weaken bolts of fastening of the generator and, moving the generator to the engine, weaken a tension of a driving belt and remove it from pulleys. |
13. Establish a new belt on pulleys. A tension of a belt carry out, moving the generator from the engine. Thus the belt deflection from pressing a thumb on long branches of a belt should make 10 mm. Tighten bolts of fastening of the generator the demanded moment. |
14. Establish a driving belt of the pump of the amplifier of a steering and the air conditioning compressor. |
15. Establish a wheel and lower the car. |
Auxiliary driving belt of the engine of 2,0 l |
16. Lift a forward part of the car and fix on supports. Remove the right forward wheel. |
17. Note an arrangement of a driving belt on pulleys. |
|
18. A wrench turn a basic plate of a pulley of the mechanism of a tension, release a belt and remove it from pulleys. |
19. Put on a new driving belt pulleys. |
20. Weaken the mechanism of a tension of a driving belt and establish a belt on a pulley then slow release the mechanism of a tension of a driving belt. |
21. Establish a wheel and lower the car. |
22. Establish a casing of the air filter. |