Opel Vectra B

since 1995 of release

Repair and car operation



Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
- 7. Transmission
   + 7.1. Coupling
   - 7.2. Mechanical transmission
      7.2.2. Introduction
      7.2.2. Technical characteristics
      7.2.3. Oil replacement in a transmission
      7.2.4. Adjustment of the mechanism of gear shifting
      7.2.5. Gear shifting mechanism
      7.2.6. Replacement of sealing rings
      7.2.7. Switch of a lamp of a backing
      7.2.8. Transmission removal
   + 7.3. Automatic transmission
   + 7.4. Power shafts
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions





7.2.4. Adjustment of the mechanism of gear shifting

GENERAL INFORMATION

Arrangement of a pin of blocking of the mechanism of a choice of transfers

1. Pressing of a pin of blocking
2. After moving of the lever of gear shifting the pin of blocking should return to a starting position

Adjustment of the mechanism is made through tightening a bolt which the gear shifting rod to draft of management of a transmission fixes. The bolt is located on a back part of a transmission before a partition of a motor compartment and on the majority of models is available from above.

PERFORMANCE ORDER
1. Weaken tightening a bolt of a rod of gear shifting, but do not unscrew completely.
2. In salon of the car remove a protective casing of the lever of gear shifting. Fix the gear shifting lever, having inserted a steel core or a drill in diameter of 5 mm into an opening located on the left forward side in the basis of the lever.
3. Fix the mechanism of a choice of transfers, pressing the podpruzhinenny pin of blocking located on a cover of the mechanism of a choice of transfers (see fig. Arrangement of a pin of blocking of the mechanism of a choice of transfers).
4. After fixing of the lever of gear shifting and a transmission tighten tightening a bolt of a rod of gear shifting in some stages.
5. Take a blocking core from the lever of gear shifting and check operation of the mechanism of gear shifting, and the pin of blocking of the mechanism of a choice of transfers automatically should return to a starting position when moving the lever of gear shifting.