Opel Vectra B

since 1995 of release

Repair and car operation

Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
- 6. Systems of start, ignition
   + 6.1. Charging system
   + 6.2. Start system
   + 6.3. Ignition system
   - 6.4. System of prestarting heating of diesel engines
      6.4.1. Introduction
      6.4.2. Technical characteristics
      6.4.3. Glow plugs
      6.4.4. Elements of system of prestarting heating of 1,7 l
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions

Душевые перегородки из HPL пластика

6.4.4. Elements of system of prestarting heating of 1,7 l

CONTROL UNIT SYSTEM OF PRESTARTING HEATING

The block is located on the left forward side of a motor compartment.

Removal and installation

PERFORMANCE ORDER

1. Remove a weight wire from the accumulator.

2. Unscrew a nut of fastening of the block.

3. Disconnect the electric socket from the block basis, unscrew two nuts and remove wires of giving of tension. Remove the block.

4. Installation is made in sequence, return to removal.

ELEMENT OF HEATING OF THE FUEL FILTER

Removal and installation

PERFORMANCE ORDER

1. Remove the fuel filter.

2. Remove a weight wire from the accumulator. Disconnect the electric socket from a heating element.

3. Unscrew the central bolt and remove a heating element from a casing of the fuel filter.

4. Establish a new sealing ring in dredging of an element of heating, establish a heating element on a casing of the fuel filter and fix the central bolt.

5. Connect the accumulator and establish the fuel filter.