Opel Vectra B

since 1995 of release

Repair and car operation

Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
- 9. Running gear
   9.1. Introduction
   9.2. Technical characteristics
   9.3. Rotary fists
   9.4. Replacement of forward bearings of a nave
   9.5. Forward bottom frame
   9.6. The lobby is resistant
   9.7. Stabilizer of cross-section stability of a forward suspension bracket
   9.8. Bottom lever of a forward suspension bracket
   9.9. Replacement of the bottom hinge of a forward suspension bracket
   9.10. Back nave
   9.11. Back rack
   9.12. Stabilizer of cross-section stability of a back suspension bracket
   9.13. Top lever of a back suspension bracket
   9.14. Bottom lever of a back suspension bracket
   9.15. Steering wheel
   9.16. Steering column
   9.17. Intermediate shaft of a steering column
   9.18. Replacement of protective covers of steering transfer
   9.19. Steering transfer
   + 9.20. Pump of the amplifier of a steering
   9.21. Air removal from steering system with the amplifier
   9.22. Tip of steering draft
   9.23. Steering draft
   9.24. Corners of installation of wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions

9.19. Steering transfer

Removal

PERFORMANCE ORDER

1. Establish forward wheels for movement directly forward.
2. Remove a forward bottom frame.
3. Unscrew a fastening bolt to the bottom frame.
	4. Note the provision of clips of fastening of steering transfer (shooter), unscrew bolts and remove clips.
5. Remove steering transfer from the bottom frame.
6. Remove rubber pillows from steering transfer, noting their arrangement.
10. The bottom bolts of fastening of a case of coupling to the block of cylinders.

Installation

PERFORMANCE ORDER

1. Establish rubber pillows on steering transfer.

2. Establish clips of fastening of steering transfer and fix them bolts.

3. Establish a back support of the power unit and fix bolts to the bottom frame.

4. Establish a forward bottom frame.

5. Check and, if necessary, adjust corners of installation of forward wheels.