Opel Vectra B

since 1995 of release

Repair and car operation



Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
- 8. Brake system
   8.1. Introduction
   8.2. Technical characteristics
   8.3. Pumping of hydraulic brake system
   8.4. Brake pipelines and hoses
   8.5. Replacement of forward brake shoes
   8.6. Replacement of back brake shoes on disk brakes
   8.7. Replacement of back brake shoes on drum-type brakes
   8.8. Replacement of brake shoes of the hand brake
   8.9. Lobbies and back brake disks
   8.10. Forward brake disk
   8.11. Back brake disk
   8.12. Back brake drum
   8.13. Forward support
   8.14. Back support
   8.15. Back working brake cylinder
   8.16. Main brake cylinder
   8.17. Brake pedal
   8.18. Vacuum amplifier of brakes
   8.19. Unilateral valve of the vacuum amplifier of brakes
   8.20. Adjustment of the hand brake
   8.21. Lever of the hand brake
   8.22. Cable of the hand brake
   8.23. Anti-blocking system of brakes (ABS)
   + 8.24. Elements of anti-blocking system of brakes
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions


5645d6d1

8.9. Lobbies and back brake disks

GENERAL INFORMATION

Arrangement of a wheel bolt with a thick washer opposite to the screw of fastening of a brake disk (And) for fastening of a brake disk

Minimum thickness of a brake disk

The minimum thickness of a brake disk is beaten out on an external surface of a brake disk.

Check

PERFORMANCE ORDER
1. Lift respectively a lobby or a back part of the car and fix on supports. Remove the corresponding wheel.
2. Establish on a bolt of fastening of a wheel a washer in thickness of 10 mm and screw in a fastening bolt in an opening located from the opposite side of screws of fastening of a brake disk.
3. Slowly turn a brake disk so that it could be considered from two parties. Wear of a brake disk from blocks should be in admissible limits. If wear exceeds an admissible limit, or there are cracks on a disk, the disk is subject to replacement.
4. The indicator of hour type check palpation of a brake disk. The indicator of hour type fix in any convenient place and, turning a disk, define its palpation at distance of 10 mm from external edge.