Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
- 3. Engines
+ 3.1. Repair of the SOCH engine established in the car
+ 3.2. Repair of the DOCH engine established in the car
+ 3.3. Repair of the diesel engine of 1,7 l established in the car
+ 3.4. Repair of the diesel engine of 2,0 l established in the car
- 3.5. Major maintenance of engines
3.5.1. Introduction
+ 3.5.2. Technical characteristics
3.5.3. Removal and installation of the petrol engine together with a transmission
3.5.4. Removal and installation of the diesel engine together with a transmission
3.5.5. Engine repair
3.5.6. Dismantling of a head of the block of cylinders
3.5.7. Cleaning and survey of a head of the block of cylinders
3.5.8. Assembly of a head of the block of cylinders
3.5.9. Removal of pistons with rods
3.5.10. Removal of a cranked shaft
3.5.11. Block of cylinders of the engine
3.5.12. Pistons and rods
3.5.13. Cranked shaft
3.5.14. Survey of radical and shatunny bearings
3.5.15. Engine balance of assembly at major maintenance
3.5.16. Installation of piston rings
3.5.17. Choice of bearings
3.5.18. Installation of a cranked shaft
3.5.19. Pistons and rods, check of working gaps of shatunny bearings
3.5.20. Check of a working gap of the bearing of the bottom head of a rod
3.5.21. Installation of pistons with rods
3.5.22. Engine start after major maintenance
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions
3.5. Major maintenance of engines
3.5.1. Introduction
| GENERAL INFORMATION |
Operations are given in this chapter on engine removal together with a transmission from the car and operation on carrying out major maintenance of a head of the block of cylinders, the block of cylinders and other knots of the engine. Information concerning repair of the engine established in the car is provided in subsection 3.1, subsection 3.2, subsection 3.3, subsection 3.4.