Opel Vectra B

since 1995 of release

Repair and car operation

Vektr B. Opel
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
- 3. Engines
   + 3.1. Repair of the SOCH engine established in the car
   + 3.2. Repair of the DOCH engine established in the car
   - 3.3. Repair of the diesel engine of 1,7 l established in the car
      3.3.1. Introduction
      3.3.2. Technical characteristics
      3.3.3. Check of pressure of compression
      3.3.4. Top dead point (VMT) of the piston of the first cylinder
      3.3.5. Cover of a head of the block of cylinders
      3.3.6. Pulley of a cranked shaft
      3.3.7. Casings of a gear belt
      3.3.8. Replacement of a gear belt
      3.3.9. Mechanism of a tension of a gear belt and pulleys
      3.3.10. Replacement of a sealing ring of a cam-shaft
      3.3.11. Check and adjustment of gaps of valves
      3.3.12. Cam-shaft and pushers
      3.3.13. Head of the block of cylinders
      3.3.14. Oil pallet
      3.3.15. Oil pump
      3.3.16. Oil radiator
      3.3.17. Flywheel
      3.3.18. Replacement of sealing rings of a cranked shaft
      3.3.19. Replacement of support of the power unit
   + 3.4. Repair of the diesel engine of 2,0 l established in the car
   + 3.5. Major maintenance of engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions

3.3.16. Oil radiator

Removal

PERFORMANCE ORDER

1. Lift a forward part of the car and fix on supports.

2. Merge cooling liquid from system of cooling or press hoses of supply of cooling liquid to an oil radiator.

3. Establish the corresponding container under the oil filter. Unscrew the oil filter.

4. Weaken collars and remove hoses of supply of cooling liquid to an oil radiator.

5. Unscrew the central bolt of fastening of an oil radiator and remove it from the engine.

Installation

PERFORMANCE ORDER

1. Establish an oil sealing ring in dredging of an oil radiator and establish an oil radiator on the block of cylinders.

2. Fix an oil radiator a bolt.

3. Connect to an oil radiator hoses of supply of cooling liquid and fix them collars.

4. Establish the new oil filter. Lower the car and check oil level in the engine.

5. Fill in cooling liquid in system of cooling of the engine. Start the engine and check an oil radiator on tightness.